Multi-switch:

• Cascadable unicable multi-switch with built-in modem for distribution of sat IF signals (four satellite frequency planes) and terrestrial signals via one cable to up to nine receivers
• The multi-switch supplies the selected transponder on a fixed frequency (userband), actuated by the receiver with a DiSEqC^TM command set in accordance with EN 50494
The multi-switches support the extended unicable command set SCD2 in accordance with EN 50607
• The extended EN 50607 command set enables all userbands to be addressed, the EN 50494 standard only userband 1-8
• Reception of the terrestrial range is still possible when the satellite receiver is switched off
• Each receiver is allocated a fixed subscriber frequency (userband) (a twin receiver requires two subscriber frequencies)
• Create a home network using the existing terrestrial distribution. The IP data is available at the subscriber outlet. This reduces the cost of installation as no new network cables need be installed
• PIN code: Protects the subscriber frequency from being accessed by another subscriber. This allows a multi-home installation
• The built-in AGC (Automatic Gain Control) ensures that the sat IF signals have a constant output level
• Built-in highly selective diplexer for the IP data
• Low power consumption due to highly efficient, short-circuit-proof switched-mode power supply unit in accordance with the ERP guideline and power-saving concept (the unicable multi-switch is switched off along with the receivers)
• Kathrein Power-Saving: LNB supply is switched off as soon as all receivers are inactive. This function can be disabled if loop-through multi-switches without Kathrein Power-Saving are used in the cascade
• LNB remote feeding via the “horizontal low” input. Kathrein Power-Saving is signalled using the “vertical low” trunk. All other inputs are voltage-free
• For indoor installation

Built-in modem:

• Modem for the Kathrein IP over Coax system “K-LAN (based on the IEEE 1901 standard)”
• Ideal for network connection for receivers, TV sets and Blu-ray players. A PC and other devices that can be networked can also be conveniently connected to a router (e.g. FRITZ!Box)
• > 500 Mbit data throughput (gross) allows multiple HD streams with simultaneous data transmission between PCs. Thanks to QoS *) corresponding services are prioritised
• Interference-free due to high screening factor
• 128 bit AES encryption. Secure private network connection at the push or a button - no software required
• Eco power mode: The modem automatically switches to stand-by until it is “woken up” again by the network. Consumption: 1.0 Watt in stand-by/4.2 Watt in operation
• Built-in highly selective diplexer for IP data
• Low power consumption due to highly efficient, short-circuit-proof switched-mode power supply unit in accordance with the ERP guideline and power-saving concept (the unicable multi-switch is switched off along with the receivers)
• Kathrein Power-Saving: LNB supply is switched off as soon as all receivers are inactive. This function can be disabled if loop-through multi-switches without Kathrein Power-Saving are used in the cascade
• LNB remote feeding via the “horizontal low” input. Kathrein Power-Saving is signalled using the “vertical low” trunk. All other inputs are voltage-free
• The EN 50607 extended command set allows all userbands to be addressed; the EN 50494 standard only userband 1-8

Accessories:

• EXI 30 (order no. 21110024): Outlet for remote feeding from the satellite connection, with optimum selection for data and HF signals
• EXI 01 free-standing modem (order no. 20510061): For converting back IP data at the subscriber outlets (e.g. for connection of a satellite receiver with Ethernet socket)
• EXI 700 software: Shows the visible modems in a network (free download from: www.kathrein.de)
• EXI 90 high-pass filter (order no. 20510062): If additional multi-switches (not from EXI range) are used and the EXI 01 is used on one of these, then the high-pass filter must be screwed onto the terrestrial input of the multi-switch. This isolates downstream multi-switches in the cascade and prevents reception and emission in the IP frequency range by and from the terrestrial antenna. The EXI 3591 has a built-in high-pass filter

*) Quality of Service
¹) All nine subscriber frequencies/userbands in operation
²) Via “horizontal low” input
³) Of which currently used: 8-68 MHz