EXR 2908
Order number: 20510019
Multi-switch 9 to 8 - 5-862 and 8 x 950-2150 MHz - Cascadable - F connectors - DiSEqC controller - Built-in power supply unit: 18 V/800 mA
PDF PRODUCT EXPORT
SPECIAL FEATURES
- Cascadable multi-switch for distribution of eight satellite frequency planes and terrestrial signals to multiple receivers
- Only one drop cable is required for each receiver (two drop cables for twin receivers)
- Independent horizontal/vertical, low/high, satellite position A/position B selection from each receiver using DiSEqCTM control
- Built-in amplifier for low connection losses in the satellite range
- Pre-emphasis for equalisation of cable attenuation
- Reception of terrestrial range possible even when satellite receiver is switched off
- High decoupling between outputs
- LNB remote feeding via horizontal low inputs. All other inputs are voltage-free (enabling operation with UAS 585).
- Low power consumption due to high-efficiency, short-circuit proof switched-mode power supply unit and power-saving concept (each individual multi-switch branch is powered by the connected receiver and is switched off whenever the receiver is switched off)
- For indoor installation
■ If not using DiSEqCTM control, horizontal/vertical, low/high switching is possible from sat position A, with tone burst also sat position A / position B - Terrestrial range: 5-862 MHz passive
- Multi-switch for eight connections, with built-in power supply unit
- Cascadable with EXR 2998
Technical data
| Type: | EXR 2908 |
| Order no.: | 20510019 |
| Subscriber connections: | 8 |
| Inputs: | 1 x terrestrial / 8 x Sat IF |
| Frequency ranges: | 5-862 / 950-2150 MHz |
| Through loss: | - / - dB |
| Attenuation ¹): | 10 -> 13 / 5 -> 0 dB |
| Horiz./vert. decoupling: | - / 25 dB |
| Subscriber decoupling: | 25 / 25 dB |
| Trunk decoupling: | - / - dB |
| Max. output level ²): | - / 109 dBµV |
| Control using DiSEqC™: | Vert./horiz., low/high, Pos. A/B |
| Control without DiSEqC™ with 14/18 V and 0/22 kHz, with tone: | Vert./horiz., low/high (pos. A) pos. A/B |
| Current drain per subscriber: | 30 mA |
| Permissible input voltage range: | 198 – 253 V |
| Nominal input voltage: | 230 V (47-63 Hz) |
| Nominal input power at 0/300/800 mA load: | 1,7/7,5/18 W |
| Secondary voltage ³): | 18 V |
| Max. total remote feed current ³): | 800 mA |
| Protection class | protection type: | II (double insulated) | IP 30 |
| Max. permissible remote feed current per trunk: | - mA |
| Connections: | F connectors |
| Ambient temperature range: | -20 to +55 °C |
| Dimensions (W x H x D): | 227 x 228 x 44 mm |
| Packaging unit/weight: | 1 (10)/1.0 pc/kg |
¹) Frequency-dependent attenuation
²) In accordance with EN 60728-3, 35 dB IMod
³) Via horizontal low input
loading ...
All Files
File: EXR 2908_2998 Bedienungsanleitung_DE_GB_11.2020.pdf
Category: Bedienungsanleitungen
Download Link: EXR 2908_2998 Bedienungsanleitung_DE_GB_11.2020.pdf
Description: Bedienungsanleitung DE / GB
File: EXR 2908 EU Konformitätserklärung_2020.pdf
Category: Erklärungen
Download Link: EXR 2908 EU Konformitätserklärung_2020.pdf
Description: Konformitätserklärung