Sat antenna 90 cm - White - Powder coated aluminium reflector - Mast clamp: 48-90 mm, galvanised and coated steel - Tilting multi-feed mounting device

PDF PRODUCT EXPORT

CAS 90ws

PDF

SPECIAL FEATURES

10 year corrosion durability guarantee in accordance with KATHREIN guarantee terms
Consists of reflector, feed system mounting and mast clamp
Reflector in proven powder coated aluminium design
Powder coated galvanised steel sheet feed system mounting
Hot dip galvanised steel sheet mast clamp
Optimum electrical data with ultra-compact mechanical dimensions thanks to offset feed and tilting multi-feed adaptor plate for positioning the feed systems at the typical side focuses for multi-feed reception
Colour: White
Exchangeable multi-feed adaptor plate included
Two universal feed systems can be mounted on the carrier arm with no additional components for reception of 3° to 4° (ASTRA 19.2°/23.5°) or 6° (e.g. ASTRA/EUTELSAT-HOTBIRD) offset satellites
Convenient installation: Completely pre-installed, reflector with keyhole mounting, large wing nuts with attachment surface for size 17 open-ended spanner, elevation scale on both sides
All connecting fittings (screws, rivets, washers, M10 threaded clips) made of corrosion resistant stainless steel or die-cast zinc
Weatherproof plastic snap-in cable holder for up to eight coaxial cables
Patented multi-feed adaptor plate tilt facility in stable, corrosion resistant die cast aluminium
For other combinations, the ZAS 90 multi-feed adaptor plate is also required

Technical data

Type:	CAS 90ws
Order no.:	20010035
Diameter:	90 cm
Colour:	White (similar to RAL 9002)
Reception range:	10,70-12,75 GHz
Antenna gain at 10.70-11.70 GHz/11.70-12.50 GHz/12.50-12.75 GHz:	38,6/39,2/39,6 dBi
Figure of merit ²) for central feed system; UAS 177/572/584/585:	18,8/19,8 dB/K
Figure of merit ²) for feed system spacing 3 -4°; UAS 177/572/584/585:	18,3/18,3 dB/K
Figure of merit ²) for feed system spacing 6°; UAS 177/572/584/585:	17,9/18,7 dB/K
Cross-polarisation decoupling:	Typ. > 27 dB
Wind load ³):	730 N
Max. permissible wind speed:	190 km/h
Adjustment range Elevation/Azimuth:	Mast-side mounting
Multi-feed adaptor plate adjustment range:	+/- 20 °
Half-power beam width ¹):	Typ. < 1,9 °
Mast clamp range:	48-90 mm
Weight approx. net/gross:	9,9/13,5 kg
Dimensions max. height:	1030 mm
Dimensions protrusion max. (from mast centre without feed system):	880 mm
Dimensions width:	987 mm
Packing unit:	1050 x 1050 x 230 mm