Loop-through socket single-cable system – 3-gang – 87-108 and 47-68/118-862 and 950-2150 MHz – DC feed-through usual. SAT connection attenuation: FM 11 dB, VHF/UHF/SAT 10 dB
- Comply: EN 60728-11 and EN 50083-2
- Disconnection of the connected receiver if it does not use the single-cable DiSEqCTM command set in accordance with EN 50494 or EN 50607 (disconnection of the voltage from the satellite connection to the input at +18 V after approx. 400 ms)
- Overload protection through electronic fuse and decoupling diodes
- ERA 14 must be used as the terminating resistor
- Sturdy die cast housing
- With screw and claw fastening, suitable for flush-mounted boxes with Ø 55-65 mm
- Can be combined with almost all installation programs
- Connections: TV – IEC (Sti) | Radio – IEC (Bu) | Sat-ZF – F (Bu)
- Directional coupler socket, 3-gang, for loop-through systems in single-cable systems to EN 50494 or EN 50607. With DC feed-through via satellite connection to the trunk line (max. 24 V/400 mA, 22 kHz and DiSEqCTM signal)
