- Stand-alone headend with 8-way multi-standard DVB-S(2)/-T(2)/-C front end, 6-way decryption (CI) and eight DVB-compliant output channels (flexibly adjustable)
- High energy efficiency
- Four satellite IF inputs with DiSEqCTM1.0 functionality for satellite multiswitches and one terr/cable input can be flexibly distributed to eight multistandard front-ends
- Extensive baseband signal processing with e.g. program filter functionality, NIT, LCN
- Eight output channels in DVB-T with six CI slots
- Maintenance-free and noiseless thanks to fan-free device design
- Cascadable (16x multistandard front end, 12x decryption (CI) and 16 x QAM/COFDM) via UFO Link
- Outstanding output values thanks to direct implementation as an FPGA solution
- All transmission parameters can be set using the USW 800 management software
- Remote maintenance and configuration
- Transfer of stored configurations and program lists to other systems
UFO 83/CI
8-way DVB-S(2) to 8-way DVB-T with 6 CAM slots
UFOmini headend 8x with CI, input: 4 x Sat IF with DiSEqC 1.0 and 1 x multifrontend DVB-T/T2, DVB-C; frontend: 8x DVB-S/S2, DVB-T/T2, DVB-C; backend: 8 x DVB-T; TS-Proz., 6 x CAM slot; COFDM modulator; prog. via USW 800
| Type: | UFO 83/CI |
| Order no: | 20610136 |
| Inputs: | —————————————————– |
| Sat IF input: | 4 x F-connector, 75 Ω |
| Terr/cable input: | 1 x F-connector, 75 Ω |
| DVB-S frequency range: | 950 – 2150 MHz |
| Decoupling: | > 25 dB |
| DiSEqC™1.0: | Vert/Horiz., Low/High; Sat. pos. (A/B/C/D) |
| Switching levels: | 14/18, 0/22 V/kHz |
| Remote power supply current for LNB: | max. 250 (at F socket no. 3), max. 60 (at F-socket no. 1, 2, 4) mA |
| Remote feed current for active antenna (5V): | 100 (at F socket no. 5) mA |
| Front end: | —————————————————– |
| DVB-S/-S2/-T/-T2/-C: | 8 x |
| Frequency grid: | 1 MHz |
| Input level range: | 60 – 100 dBµV |
| Permissible level difference: | 20 dB |
| DVB-S demodulation: | —————————————————– |
| DVB-S standard: | EN 300 421 |
| DVB-S input symbol rate QPSK: | 1 – 45 MS/s |
| DVB-S code rate (Viterbi): | 1/2, 2/3, 3/4, 5/6, 7/8 |
| DVB-S Roll off: | 35 % |
| DVB-S AFC control range: | ± 5 MHz |
| DVB-S2 demodulation: | —————————————————– |
| DVB-S2 standard: | EN 302 307, TR 102-376 |
| DVB-S2 input symbol rate QPSK: | 1 – 45 MS/s |
| DVB-S2 code rate (LDPC) QPSK: | 1/2, 3/5, 2/3, 3/4, 4/5, 5/6, 8/9, 9/10 |
| DVB-S2 input symbol rate 8PSK: | 1 – 45 MS/s |
| DVB-S2 code rate (LDPC) 8PSK: | 3/5, 2/3, 3/4, 5/6, 8/9, 9/10 |
| DVB-S2 Roll off: | 20/25/35 % |
| DVB-T (COFDM) demodulation: | —————————————————– |
| DVB-T Standard: | EN 300744, NorDig Unified 2.2.1, D-Book 7.0, Supports all C.R, G.I, LP and HP streams |
| DVB-T guard interval: | 1/4, 1/8, 1/16, 1/32 |
| DVB-T FEC: | 1/2, 2/3, 3/4, 5/6, 7/8 |
| DVB-T FFT mode: | 2k, 8k |
| DVB-T bandwidth: | 6/7/8 MHz |
| DVB-T constellation: | QPSK, 16 QAM, 64 QAM |
| DVB-T2 (COFDM) demodulation: | —————————————————– |
| DVB-T2 Standard: | EN 302755-V1.31, DVB-T2 Lite compliant, Single and multiple PLP support, NorDig Unified 2.2.1, D-Book 7.0 |
| DVB-T2 guard interval: | 1/128, 1/32, 1/16, 19/256, 1/8, 19/128, 1/4 |
| DVB-T2 FEC: | 1/2, 3/5, 2/3, 3/4, 4/5, 5/6 |
| DVB-T2 FFT mode: | 1k, 2k, 4k, 8k, 16k, 32k |
| DVB-T2 bandwidth: | 1.7/5/6/7/8 MHz |
| DVB-T2 constellation: | QPSK, 16 QAM, 64 QAM, 256 QAM |
| DVB-C demodulation: | —————————————————– |
| DVB-C standard: | EN 300 429/ITU J.83 Annex A/C |
| DVB-C frequency range: | 42-1002 MHz |
| DVB-C input symbol rate: | 1-7.2 MHz |
| DVB-C constellation: | 4/16/32/64/128/256 QAM |
| MPEG-TS processor: | —————————————————– |
| Program filter: | ● |
| PSI/SI processing: | Cable-NIT, LCN, PCR correction, CAT |
| LCN data: | NorDig Descriptor V1, IEC 62216, FRANSAT PRO |
| Stuffing: | Automatic |
| Decryption: | —————————————————– |
| 6 CAM slots: | PCMCIA interface |
| TS routing CAM: | Single and serial decoding |
| Modulator: | —————————————————– |
| Modulator output channels: | 8 x DVB-T, 2k mode |
| Modulator constellation: | QPSK, 16/64 QAM |
| Modulator guard interval: | 1/4, 1/8, 1/16, 1/32 |
| Modulator code rate: | 1/2, 2/3, 3/4, 5/6, 7/8 |
| HF output connection: | 1 x F-connector, 75 Ω |
| HF output Frequency range: | 47 – 1006 MHz (fine adjustment in 125 kHz steps) |
| HF output Frequency range (channel list): | 47 – 86/110 – 862 (setting via channel list) MHz |
| RF output return loss: | 14 (47 MHz) -1.5 dB/oct. dB |
| HF output level: | 105 dBµV |
| HF output pre-emphasis: | 8 dBµV |
| HF output Level adjustment range: | -20 (in 0.5 dB steps) dB |
| HF output Level stability: | ± 0.8 dB |
| HF output Frequency stability: | 35 ppm |
| RF output MER: | Type. 40 dB |
| HF output Shoulder attenuation: | ≥ 60 (at standard level) dB |
| HF output secondary emissions: | ≥ 60 dB |
| Test output: | —————————————————– |
| Test socket: | 1 x F-connector, 75 Ω |
| Level relative to the output: | 25 dB |
| System data: | —————————————————– |
| Power consumption: | 38 – 47 W *) |
| Temperature range: | 0 to +45 °C |
| Mains voltage: | 100 – 240 V |
| Protective shutdown: | > 70 °C |
| Dimensions (W x H x D): | 350 x 97 x 244 mm |
| Weight: | Approx. 4 kg |
*) The power consumption depends on the input and output configuration (data without LNB supply or remote supply for active antennas)
- UFO 83/CI - Produktdatenblatt (Version: 08/2024 - Größe: 414.84 KB) (4 downloads)
- UFOmini Sicherheitshinweise | Safety Instructions (Version: 1 - Größe: 50.37 KB) (20 downloads)
- UFO 83/CI Software Lizenzinformationen (Version: lizenzinformationen - Größe: 561.16 KB) (5 downloads)
- Firmware Version V09 für UFO 83/CI (Version: 1 - Größe: 15.36 MB) (15 downloads)
- UFO 83/CI - User Manual (Version: 1 - Größe: 1.72 MB) (53 downloads)
- UFO 83/CI - Bedienungsanleitung (Version: 1 - Größe: 1.73 MB) (68 downloads)
