- Cascadable multiswitches for distribution of 16 satellite levels and terrestrial signals to many receivers
- Only one down conductor is required per receiver (two down conductors for twin receivers)
- Independent selection of horizontal/vertical, low/high, satellite positions A/B/C/D from any receiver through DiSEqCTM control
- With control without DiSEqC™, switching horizontal/vertical, low/high from Sat position A, with Tone Burst additionally Sat position A/position B is possible
- Integrated amplifier for low connection losses in the satellite range
- Integrated preemphasis to equalize cable attenuation
- Possibility of receiving the terrestrial range even when the satellite receiver is switched off
- Terrestrial range: 5-862 MHz passive
- High decoupling between outputs
- Remote power supply possibility via the inputs horizontal low. All other inputs are voltage-free (thus operation with UAS 585 possible).
- For indoor installation
- Multiswitch pass-through for system expansion by eight connections each
- High cascading capability (up to 40 connections)
EXR 1718
Multiswitch with 8 connections for 4 satellites
| Type: | EXR 1718 |
| Order no: | 20510028 |
| Subscriber lines: | 8 |
| Inputs: | 1 x terr. / 16 x Sat IF |
| Frequency ranges: | 5 – 862 MHz | 950 – 2150 MHz |
| Throughput attenuation: | 4 / 1 → 3 ¹) dB |
| Connection attenuation ¹): | 13 → 16 dB | 5 → 0 dB |
| Decoupling horizontal → vertical: | 25 dB |
| Decoupling participants: | 25 / 25 dB |
| Decoupling strain: | 40 dB |
| Max. Output level ²): | 112 dBµV |
| Control with DiSEqC™: | Vert./horiz., low/high, pos. A/B/C/D |
| Control without DiSEqC™ – with 14/18 V and 0/22 kHz – with Tone Burst: | Vert./horiz., low/high (pos. A) Pos. A/B |
| Current consumption/participant: | 30 mA |
| Protection class: | IP 30 |
| Max. perm. Remote power supply current per trunk: | 1000 mA |
| Connections: | F-Connectors |
| Permissible ambient temperature: | -20 to +55 °C |
| Dimensions (W x H x D) without F sockets: | 182 x 388 x 45 mm |
| Packaging unit/weight: | 1 (5)/16 pcs./kg |
¹) Frequency-dependent attenuation
²) According to EN 60728-3, 35-dB-IMA
³) About the inputs horizontal low
- EXR 1718 - EU-Konformitätserklärung (Version: konformitätserklärung_exr 1718 - Größe: 95.11 KB) (54 downloads)
- EXR 1718 - Product data sheet (Version: 09/2023 - Größe: 184.64 KB) (51 downloads)
- EXR 1718 - Produktdatenblatt (Version: 09/2023 - Größe: 183.84 KB) (80 downloads)
- EXR 1708/1718 - Bedienungsanleitung | User Manual (Version: 1 - Größe: 921.39 KB) (249 downloads)
... from the same product category & recommendations
House connection amplifier 47/85-1006 MHz | remotely powered via RF input (self-supply)
