- Cascadable multiswitches for distribution of eight satellite levels and terrestrial signals to many receivers
- Only one down conductor is required per receiver (two down conductors for twin receivers)
- Independent selection of horizontal/vertical, low/high, satellite position A/position B from any receiver through DiSEqCTM control
- Integrated amplifier for low connection losses in the satellite range
- Preemphasis for equalization of cable attenuation integrated
- Reception of the terrestrial range possible even when the satellite receiver is switched off
- High decoupling between outputs
- LNB remote power supply possibility via the inputs horizontal low. All other inputs are voltage-free (thus operation with UAS 585 possible).
- Low power consumption due to highly efficient, short-circuit-proof switched-mode power supply and power-saving concept (each individual multiswitch branch is supplied by the connected receiver and switched off when the receiver is switched off)
- For indoor installation
- With control without DiSEqC™, switching horizontal/vertical, low/high from Sat position A, with Tone Burst additionally Sat position A/position B is possible
- Terrestrial range: 5-862 MHz passive
- Multiswitch for eight connections, with integrated power supply unit
- Cascadable with EXR 2998
EXR 2908
Multiswitch with 8 connections for 2 satellites
| Type: | EXR 2908 |
| Order no: | 20510019 |
| Subscriber lines: | 8 |
| Inputs: | 1 x terr. / 8 x Sat IF |
| Frequency ranges: | 5 – 862 MHz | 950 – 2150 MHz |
| Connection attenuation ¹): | 10 → 13 dB | 5 → 0 dB |
| Decoupling horizontal → vertical: | 25 dB |
| Decoupling participants: | 25 / 25 dB |
| Max. Output level ²): | 109 dBµV |
| Control with DiSEqC™: | Vert./horiz., low/high, pos. A/B |
| Control without DiSEqC™ – with 14/18 V and 0/22 kHz – with Tone Burst: | Vert./horiz., low/high (pos. A) Pos. A/B |
| Current consumption/participant: | 30 mA |
| Permissible input voltage range: | 198 – 253 V |
| Nominal input voltage: | 230 V (47 – 63 Hz) |
| Nominal input power at 0-/300-/800-mA load: | 1,7/7,5/18 W |
| Voltage secondary ³): | 18 V |
| Max. Total remote power supply current ³): | 800 mA |
| Protection class | Protection class: | II (protective insulation) | IP 30 |
| Connections: | F-Connectors |
| Permissible ambient temperature: | -20 to +55 °C |
| Dimensions (W x H x D): | 227 x 228 x 44 mm |
| Packaging unit/weight: | 1 (10)/1.0 pc/kg |
¹) Frequency-dependent attenuation
²) According to EN 60728-3, 35-dB-IMA
³) Via input horizontal low
- EXR 2908 - EU-Konformitätserklärung (Version: konformitätserklärung_exr 2908 - Größe: 95.29 KB) (80 downloads)
- EXR 2908 - Product data sheet (Version: 09/2023 - Größe: 177.62 KB) (72 downloads)
- EXR 2908 - Produktdatenblatt (Version: 09/2023 - Größe: 176.94 KB) (226 downloads)
- EXR 2908/2998 - Bedienungsanleitung | User Manual (Version: 1 - Größe: 1.12 MB) (1089 downloads)
