Satellite antenna accessories
With the right satellite antenna accessories, satellite systems can be professionally installed, expanded, and adapted to different requirements. Whether mast mounts, wall brackets, multi-feed adapter plates, heating mats, temperature controllers, or covers – KATHREIN offers perfectly matched components for safe installation and consistently reliable operation. Depending on the antenna type and application, you will find accessories here for mounting on roofs, walls, or flat roofs, as well as solutions for multi-feed reception and operation in demanding weather conditions.
Clear filters
Construction protection mat 1500 x 1200 x 10 mm made of PUR-bonded rubber granulate
High-performance heating mat for the CAS 124 satellite antenna
High-performance heating mat for the CAS 180 satellite antenna
Temperature control for ESO 90H/ESO 120H/ESO 124H/ESO 126/ESO 129
Temperature control for the reflector heaters ESO 90/120/124/180 H and the heaters ESO 126 and ESO 129
Temperature control for the reflector heaters ESO 90/120/124/180 H, ESO 124/180 HL and the heaters ESO 126 and ESO 129
Weather-compensated temperature control for the reflector heaters ESO 120/124/180 H and ESO 124/180 HL as well as the feed system brackets ESO 126 and ESO 129
Short wall mount for SAT antennas KEA 650, KEA 750, KEA 850, CAS 06, CAS 60 and CAS 80xx
Medium wall mount for satellite antennas KEA 650, KEA 750, KEA 850, CAS 06, CAS 60 and CAS 80xx
Long wall mount for satellite antennas KEA 650, KEA 750, KEA 850, CAS 06, CAS 60 and CAS 80xx
High-quality perforated sheet mounting plate made of galvanized steel, 400 x 600 mm
High-quality perforated sheet mounting plate made of galvanized steel, 600 x 800 mm
High-quality perforated sheet mounting plate made of galvanized steel, 800 x 1000 mm
Lockable assembly cabinet made of painted steel housing, measuring 400 x 600 x 200 mm
Lockable assembly cabinet made of painted steel housing, measuring 600 x 600 x 200 mm
Lockable assembly cabinet made of painted steel housing, measuring 600 x 800 x 200 mm
Mast 0,56 m – Diameter: 60 mm – For use with ZTH 01 – suitable for CAS 60/80/90
Short wall mount for CAS 06, CAS 60 and CAS 80xx satellite antennas
Plug-in mast 2,0 m – D = 42 mm – Thickness: 2 mm – hot-dip galvanized – twist-proof – pluggable with same outer diameters – St 37
Plug-in mast 2,0 m – D = 48 mm – Thickness: 2 mm – St 37 – hot-dip galvanized – twist-proof – pluggable with masts of the same outer diameter
Sliding mast 2 x 2 m – 40/48 mm – St 52 – thickness: 2,5 mm – hot-dip galvanized – twist-proof – permissible bending moment (800 N/m², 3 m usable length): 1170 Nm
Sliding mast 2 x 2,5 m – 40/48 mm – St 37 – Thickness: 2 mm – hot-dip galvanized – twist-proof – Permissible bending moment (800 N/m², 4/3 m usable length): 500/540 Nm
Sliding mast 2 x 2,5 m – 40/48 mm – St 52 – thickness: 2,5 mm – hot-dip galvanized – twist-proof – bending moment (800 N/m², 4/3 m usable length): 1040/1080 Nm
Sliding mast 2 x 3 m – 40/48 mm – St 52 – thickness: 2,5 mm – hot-dip galvanized – twist-proof – permissible bending moment (800 N/m², 5/4 m usable length): 850/960 Nm
Sliding mast 2 x 3 m – 48/60 mm – St 52 – thickness: 2,5 mm – hot-dip galvanized – twist-proof – permissible bending moment (800 N/m², 5/4 m usable length): 1150/1280 Nm
Boom arm – L = 450 mm – for BI/B III antennas up to 286 N wind load – Wind load: 13,5 N
Boom arm – L = 300 mm – for UHF antennas up to 286 N wind load – Wind load: 15 N
Roofing flashing 38-60 mm – red – aluminum, plastic-coated – environmentally friendly, lead-free
Roofing flashing 38-60 mm – black – aluminum, plastic-coated – environmentally friendly, lead-free
Cover collar 27-60 mm – self-welding – for subsequent installation
Mast cap – for mast diameters 48/60 mm – cable entry: 10x LCD 90/95/111/115 or 8x LCD 89 via the mast tip
Cover collar D = 42 mm, for rainproof covering of the entry opening in roof sheets
Cover collar D = 48 mm – for rainproof covering of the entry opening in roofing sheets
Cover collar D = 60 mm – for rainproof covering of the entry opening in roofing sheets
Mast mounting bracket set – for antenna masts with a diameter of 27-60 mm – projection: max. 230 mm – hot-dip galvanized
Bottom mast bracket – between-rafter mounting – for mast diameters: 32 and 48 mm – distance between rafters: 0,5–0,8 m
Top mast bracket – between-rafter mounting – L = 1,1 m for mast diameters: 32 and 48 mm
Mast spacers – for D = 32-60 mm – For compensating for offset fixing points in the roof truss – Spacing: 15-160 mm
Mast shoe – mast diameter: 32-60 mm – with grounding connection
Mast mounting set 48 mm – consisting of: Mast cap ZTC 08, sealing collar, lead roofing sheet, mast base, mast clamp, wood screws
Mast mounting set 60 mm – consisting of: Mast cap ZTC 08, sealing collar, lead roofing sheet, mast base, mast clamp, wood screws
Roof rafter bracket mounting set – consisting of: cover collar, lead cover plate, mast cap ZTC 08
Roof rafter bracket mounting set – color: red – consisting of: cover collar, aluminum cover plate, mast cap ZTC 08
Roof rafter bracket mounting set – color: black – consisting of: cover collar, aluminum cover plate, mast cap ZTC 08
Mast mounting set 48 mm – color: red – consisting of: mast cap ZTC 08, cover collar, aluminum roof sheet, mast shoe, mast clamp, wood screws
Mast mounting set 48 mm – Color: black – consisting of: mast cap ZTC 08, cover collar, aluminum roof sheet, mast shoe, mast clamp, wood screws
Mast mounting set 60 mm – color: red – consisting of: mast cap ZTC 08, cover collar, aluminum roof sheet, mast shoe, mast clamp, wood screws
Mast mounting set 60 mm – Color: black – consisting of: mast cap ZTC 08, cover collar, aluminum roof sheet, mast shoe, mast clamp, wood screws
Mast clamp 42 mm – for straight and angled mounting – hot-dip galvanized – complete with mounting screws
Mast clamp 48 mm – for straight and angled mounting – hot-dip galvanized – complete with mounting screws
Mast clamp 60 mm – for straight and angled mounting – hot-dip galvanized – complete with mounting screws
