SAT antenna CAS 120 H
- 120 cm diameter satellite dish in white
- Includes pre-installed ESO 120 H heating mat
- Consisting of reflector, power supply system bracket and heating mat ESO 120 H
- 10-year warranty on corrosion resistance according to KATHREIN warranty conditions
- Reflector in proven aluminum design, powder-coated
- Feeding system bracket and mirror back structure made of galvanized sheet steel, powder-coated
- Interchangeable multi-feed adapter plate included.
- Optimal electrical data with small mechanical dimensions thanks to offset power supply
- Swiveling multi-feed adapter plate for positioning the feed systems in typical secondary focal points
- Patented swivel mechanism of the multifeed adapter plate in stable, corrosion-resistant aluminum casting technology
- Two universal feeding systems can be attached to the support arm without additional components.
- Suitable for satellites 3° to 4° apart, e.g. ASTRA 19,2°/23,5°
- Suitable for satellites spaced 6° apart
- With a satellite spacing of 6°, an additional feed system can be mounted in the center.
- Reception from three satellites, each 3° apart, is possible.
- Snap-in cable holders for up to eight coaxial cables made of weather-resistant plastic
- Additional equipment required for installation: Azimuth/elevation bracket ZAS 120
Heating mat ESO 120 H
- Good heat distribution thanks to the optimal positioning of the heating mat on the reflector.
- Element carrier made of aluminum foil
- Front side with self-adhesive foil strips
- Thermal insulation made of 4 mm bubble wrap with reflective layer
- Built-in sensor for defining the heating temperature via a controller
- Operation without control possible
- Operation with the controllers ESO 005, ESO 96 S, ESO 97 S and ESO 97 SL is possible.
SAT dish CAS 120 H
| Type: | CAS 120/W |
| Order no.: | 20010008 |
| Diameter: | 120 cm |
| Color: | White (similar to RAL 9002) |
| Reception area: | 10,70 – 12,75 GHz |
| Antenna gain at 10,70 – 11,70 GHz | 11,70 – 12,50 GHz | 12,50 – 12,75 GHz: | 41,5dBi | 42,15dBi | 42,5dBi |
| System quality ²) Feeding system centered; UAS 571/572/584/585: | 22,0 dB/K | 23,0 dB/K |
| System quality ²) Feed system spacing 3° – 4°; UAS 571/572/584/585: | 21,8 dB/K | 22,8 dB/K |
| System quality ²) Feed system spacing 6°; UAS 571/572/584/585: | 21,5 dB/K | 22,6 dB/K |
| Cross-polarization decoupling: | Typical > 30 dB |
| Wind load ³): | 1296 N |
| Maximum permissible wind speed: | 157 km/h |
| Elevation | Azimuth adjustment range: | 5 – 50 ° | 360 ° |
| Half-width ¹): | Typ. < 1,43 ° |
| Clamping range of the mast clamp: | 50 - 90 mm |
| Weight approx. net | gross: | 18,3kg | 29,0kg |
| Dimensions (W x H max. x projection max. from mast center without feeding system): | 1234 x 1570 x 1408 mm |
| Packing dimensions: | 1330 x 1330 x 250 mm |
¹) At midband
²) Type. G/T at 11,3/12,5 GHz
³) At a dynamic pressure of 800 N/m² according to EN 60728-11
Heating mat ESO 120 H
| Type: | ESO 120 H |
| Order no.: | 237500002 |
| Suitable for satellite dishes: | CASE 120 |
| Permissible ambient temperature: | -40 to +80 °C |
| Heating capacity: | 716 W |
| Complies with the standards: | EN 61000-6-1, EN 61000-6-3, EN 1010-1, EN 60519-1, EN 60519-2 |
| Rated current: | 3 A |
| Insulation resistance: | > 20 MΩ |
| Nominal temperature (frost protection): | + 3 ° C |
| Temperature protection: | 80°C opener |
| Design and execution according to: | DIN VDE 0100, DIN EN 60519-1, VDE 0721-1 DIN EN 50173-4, VDE 0800-173-4 |
| Operating voltage: | 230 +6%/-10%; 50 – 60 Hz V |
| Lifespan: | at least 10 years |
| Protection class: | IP 65 |
| Dielectric strength: | 2,5 kV |
| Rated capacity: | approx. 500 W/m² |
| Recommended installation temperature: | +15 to +30 °C |
| Nominal voltage: | 230 V |
| Weight | Approx. 2,3 kg |