SAT antenna CAS 180 HL
- Professional satellite dish with a diameter of 180 cm
- Includes pre-installed, high-performance heating mat ESO 180 HL
- Reflector in proven aluminum design
- Powder-coated reflector in matte white
- Feeding system bracket consisting of an aluminum square tube as a support arm and an aluminum plate for mounting the feeding system.
- Mast bracket made of aluminum and stainless steel
- Optimal electrical data with small mechanical dimensions thanks to offset power supply
- Multi-feed systems are feasible in conjunction with compact feeding systems.
- In its delivered state, up to two compact feeding systems can be attached to the support arm.
- Suitable for receiving satellites 3° apart at CAS 180
- For other multi-feed combinations, an additional multi-feed adapter plate is required.
- Additional required feed system bracket: ZAS 181C, BN 237500015
- Additional required azimuth/elevation mount: ZAS 186, BN 218676
- Azimuth fine adjustment for CAS 180/CAS 124: ZAS 189, BN 23710017
- Suitable stands for CAS 180: ZSO 180, BN 23710014, and ZSO 181, BN 23710015
Heating mat ESO 180 HL
- High-performance heating mat for CAS 180
- Integrated thermal insulation and PTFE-insulated heating elements
- Good heat distribution thanks to the optimal positioning of the heating mat on the reflector.
- Element carrier made of aluminum foil
- Front side with self-adhesive foil strips
- Thermal insulation made of 4 mm bubble wrap with reflective layer
- Built-in temperature sensor for defining the heating temperature via a controller
- A control system is absolutely necessary for operation.
- Operation with the ESO 97 SL and ESO 99 S controllers is possible.
SAT dish CAS 180 HL
| Type: | CASE 180 |
| Order no.: | 216235 |
| Diameter: | 180 cm |
| Reception area: | 10,70 – 12,75 GHz |
| Antenna gain at 10,70 – 11,70 GHz: | 44.5 dBi |
| Antenna gain at 11,70 – 12,50 GHz: | 45.15 dBi |
| Antenna gain at 12,50 – 12,75 GHz: | 45.5 dBi |
| Half-width: | 0.9 ° |
| Cross-polarization decoupling: | > 30 dB |
| Wind load ¹): | 3396 N |
| Clamping range of the mast clamp ZAS 180/ZAS 186: | 75 - 114 mm |
| Elevation adjustment range: | 5-50 degrees |
| Azimuth adjustment range: | 360 ° |
| System quality (G/T): | See feeding system |
| Max. dimensions Height: | 1511 mm |
| Max. dimensions of the projection (from the center of the mast without the feeding system): | 1900 mm |
| Dimensions Width: | 1980 mm |
| Packaging dimensions (L x W x H): | 2230 x 2120 x 390 mm |
| Weight approx. net | gross: | 60,0kg | 81,5kg |
¹) At a dynamic pressure of 800 N/m² according to EN 60728-11
Heating mat ESO 180 HL
| Type: | ESO 180 HL |
| Order no.: | 237500006 |
| Suitable for satellite dishes: | CASE 180 |
| Permissible ambient temperature: | -40 to +80 °C |
| Heating capacity: | 2750 W |
| Complies with the standards: | EN 61000-6-1, EN 61000-6-3, EN 1010-1, EN 60519-1, EN 60519-2 |
| Rated current: | approx. 12 A |
| Insulation resistance: | > 20 MΩ |
| Nominal temperature (frost protection): | + 3 ° C |
| Temperature protection: | 80°C opener |
| Design and execution according to: | DIN VDE 0100, DIN EN 60519-1, VDE 0721-1 DIN EN 50173-4, VDE 0800-173-4 |
| Operating voltage: | 230 +6%/-10%; 50 – 60 Hz V |
| Lifespan: | at least 10 years |
| Protection class: | IP 65 |
| Dielectric strength: | 2,5 kV |
| Rated capacity: | approx. 500 W/m² |
| Recommended installation temperature: | +15 to +30 °C |
| Nominal voltage: | 230 V |
| Weight | Approx. 4,3 kg |