CAS 90 satellite antenna
- SAT antenna with a 90 cm diameter in graphite
- Version without logo
- Consisting of reflector, feed system bracket and mast bracket
- 10-year warranty on corrosion resistance according to KATHREIN warranty conditions
- Reflector in proven aluminum design, powder-coated
- Feeding system bracket made of galvanized sheet steel, powder-coated
- Mast mounting made of sheet steel, hot-dip galvanized
- Optimal electrical data with small mechanical dimensions thanks to offset power supply
- Swiveling multi-feed adapter plate for positioning the feed systems in typical secondary focal points
- Interchangeable multi-feed adapter plate included.
- Two universal feeding systems can be attached to the support arm without additional components.
- Suitable for satellites 3° to 4° apart, e.g. ASTRA 19,2°/23,5°
- Suitable for satellites 6° apart, e.g. ASTRA/EUTELSAT-HOTBIRD
- For other combinations, the ZAS 90 multifeed adapter plate is also required.
- High ease of assembly thanks to completely pre-assembled design
- Reflector with keyhole mounting
- Large wing nuts with a mounting surface for a 17 mm open-end wrench
- Bilateral elevation scale
- Fasteners made of corrosion-resistant stainless steel or zinc die-casting
- Threaded bracket M10
- Snap-in cable holders for up to eight coaxial cables made of weather-resistant plastic
- Patented swivel mechanism of the multifeed adapter plate in stable, corrosion-resistant die-cast aluminum technology
Heating mat ESO 90 H
- Includes pre-installed ESO 90 H heating mat
- Good heat distribution thanks to the optimal positioning of the heating mat on the reflector.
- Element carrier made of aluminum foil
- Front side with self-adhesive foil strips
- Thermal insulation made of 4 mm bubble wrap with reflective layer
- Built-in sensor for defining the heating temperature via a controller
- Operation without control possible
- Operation with the controllers ESO 005, ESO 96 S, ESO 97 S and ESO 97 SL is possible.
CAS 90 satellite antenna
| Type: | CAS 90gr |
| Diameter: | 90 cm |
| Reception area: | 10,70 – 12,75 GHz |
| Antenna gain at 10,70 – 11,70 GHz | 11,70 – 12,50 GHz | 12,50 – 12,75 GHz: | 38,6/39,2/39,6 dBi |
| System quality ²) Feeding system centered; UAS 571/572/584/585: | 18,8/19,8 dB/K |
| System quality ²) Feed system spacing 3° – 4°; UAS 571/572/584/585: | 18,3 dB/K | 18,3 dB/K |
| System quality ²) Feed system spacing 6°; UAS 571/572/584/585: | 17,9 dB/K | 18,7 dB/K |
| Cross-polarization decoupling: | Typical > 27 dB |
| Wind load ³): | 730 N |
| Maximum permissible wind speed: | 190 km/h |
| Elevation | Azimuth adjustment range: | mast assembly |
| Adjustment range of the multifeed adapter plate: | ±20° |
| Half-width ¹): | Typ. < 1,9 ° |
| Clamping range of the mast clamp: | 48 - 90 mm |
| Weight approx. net | gross: | 9,9kg | 13,5kg |
| Dimensions: Maximum height: | 1030 mm |
| Maximum dimensions (from mast center without feeding system): | 880 mm |
| Dimensions Width: | 987 mm |
| Packing dimensions: | 1050 x 1050 x 230 mm |
¹) At midband
²) G/T at 11,3/12,5 GHz
³) At a dynamic pressure of 800 N/m² according to EN 60728-11
Heating mat ESO 90 H
| Type: | ESO 90 H |
| Order no.: | 237500001 |
| Suitable for satellite dishes: | CAS 90xx |
| Permissible ambient temperature: | -40 to +80 °C |
| Heating capacity: | 345 W |
| Complies with the standards: | EN 61000-6-1, EN 61000-6-3, EN 1010-1, EN 60519-1, EN 60519-2 |
| Rated current: | 1.5 A |
| Insulation resistance: | > 20 MΩ |
| Nominal temperature (frost protection): | + 3 ° C |
| Temperature protection: | 80°C opener |
| Design and execution according to: | DIN VDE 0100, DIN EN 60519-1, VDE 0721-1 DIN EN 50173-4, VDE 0800-173-4 |
| Operating voltage: | 230 +6%/-10%; 50 – 60 Hz V |
| Lifespan: | at least 10 years |
| Protection class: | IP 65 |
| Dielectric strength: | 2,5 kV |
| Rated capacity: | approx. 500 W/m² |
| Recommended installation temperature: | +15 to +30 °C |
| Nominal voltage: | 230 V |
| Weight | Approx. 1,6 kg |