- High-performance flexible special heating mat for SAT antenna CAS 180
- Integrated thermal insulation and PTFE-insulated heating elements
- Good heat distribution thanks to the optimal positioning of the heating mat on the reflector.
- Element carrier made of aluminum foil
- Front side with self-adhesive foil strips
- Thermal insulation made of 4 mm bubble wrap with reflective layer
- Built-in sensor for defining the heating temperature via a controller
- A control system is absolutely necessary for operation.
- The required temperature sensor is integrated into the heating mat.
- Operation with the ESO 97 SL and ESO 99 S controllers is possible.
| Type: | ESO 180 HL |
| Order no.: | 237500006 |
| Suitable for satellite dishes: | CASE 180 |
| Permissible ambient temperature: | -40 to +80 °C |
| Heating capacity: | 2750 W |
| Complies with the standards: | EN 61000-6-1, EN 61000-6-3, EN 1010-1, EN 60519-1, EN 60519-2 |
| Rated current: | approx. 12 A |
| Insulation resistance: | > 20 MΩ |
| Nominal temperature (frost protection): | + 3 ° C |
| Temperature protection: | 80°C opener |
| Design and execution according to: | DIN VDE 0100, DIN EN 60519-1, VDE 0721-1 DIN EN 50173-4, VDE 0800-173-4 |
| Operating voltage: | 230 +6%/-10%; 50 – 60 Hz V |
| Lifespan: | at least 10 years |
| Protection class: | IP 65 |
| Dielectric strength: | 2,5 kV |
| Rated capacity: | approx. 500 W/m² |
| Recommended installation temperature: | +15 to +30 °C |
| Nominal voltage: | 230 V |
| Weight | Approx. 4,3 kg |
- 1 x heating mat with 3 m cable (H05RNF) and heating temperature sensor
- Aluminum foil, mesh-reinforced, 0,05 x 17 m
- White adhesive film for covering aluminum foil, 0,075 x 17 m
- 8 x cable ties, 360 mm