- Cascadable multiswitch with 8 subscriber connections
- For 4 satellite positions with a total of 16 satellite levels
- For the distribution of SAT IF and terrestrial signals
- Only one down conductor is required per receiver.
- Two cable leads are required for twin receivers.
- Independent selection of horizontal/vertical and low/high band per receiver
- DiSEqC™ control for SAT positions A/B/C/D
- Without DiSEqC™ control of SAT position A is possible; with Tone Burst, SAT positions A/B are also controlled.
- Integrated amplifier for low insertion loss in the SAT range
- Integrated pre-emphasis for equalizing cable attenuation
- Terrestrial range 5–862 MHz passive
- Terrestrial reception is possible even with the satellite receiver switched off.
- High decoupling between the outputs
- Remote power supply option via the horizontal low inputs
- All other inputs are voltage-free, therefore operation with UAS 585 is possible.
- Integrated, highly efficient and short-circuit proof switched-mode power supply
- Power saving concept: Each multiswitch branch is powered by the connected receiver and deactivated when switched off.
- Expandable with EXR 1718
- Suitable for indoor installation
| Type: | EXR 1708 |
| Order no.: | 20510027 |
| Subscriber connections: | 8 |
| inputs: | 1 x terrestrial / 16 x satellite IF |
| Frequency ranges: | 5 – 862 MHz | 950-2150MHz |
| Insertion loss ¹): | 10 → 13 dB | 5 → 0 dB |
| Decoupling horizontal → vertical: | 25 dB |
| Decoupling participants: | 25/25 dB |
| Max. output level ²): | 112 dBµV |
| Control via DiSEqC™: | Vert./horiz., low/high, pos. A/B/C/D |
| Control without DiSEqC™ – with 14/18 V and 0/22 kHz – with Tone Burst: | Vert./horiz., low/high (Pos. A) Pos. A/B |
| Power consumption per participant: | 30 mA |
| Permissible input voltage range: | 198 - 253 V |
| Nominal input voltage: | 230 V (47 – 63 Hz) |
| Input power rating at 0/600/1500 mA load: | 0,4 / 13,4 / 32 W |
| Secondary voltage ³): | 18 V |
| Max. total remote power supply ³): | 1500 mA |
| Protection class | Protection type: | II (protective insulated) | IP 30 |
| Connections: | F-connectors |
| Permissible ambient temperature: | -20 to +55 °C |
| Dimensions (W x H x D) without F-connectors: | 249 x 388 x 45 mm |
| Packaging unit/weight: | 1 (5)/1,7 pcs/kg |
¹) Frequency-dependent attenuation
²) According to EN 60728-3, 35 dB IMA
³) Via the horizontal low inputs