EXR 1942

Order number: 20510040

Unicable multi-switch 9 to 2x4 - 5-862 and 8 x 950-2150 MHz - 2 outputs for 4 receivers each - F connectors - Cascadable - Built-in power supply unit: 18 V/800 mA

EXR 1942
Unicable multi-switch 9 to 2x4 - 5-862 and 8 x 950-2150 MHz - 2 outputs for 4 receivers each - F... more
Product information "EXR 1942"
Related links to "EXR 1942"

PDF PRODUCT EXPORT

EXR 1942

PDF

SPECIAL FEATURES


  • ■ Cascadable unicable multi-switch for distribution of digital sat IF signals (eight satellite frequency planes; including HDTV) and terrestrial signals for supplying 2 x 4 receivers in single family households
    ■ No restriction on range of channels - the entire range of channels from a satellite is transmitted
    ■ Independent horizontal/vertical, low/high band, sat position A / position B selection and transponder selection from each receiver
    ■ Horizontal/vertical/ low/high band, sat position A/position B switching and transponder selection are carried out by the multi-switch, controlled by the receiver using a special SCR unicable command set in accordance with EN 50494
    ■ For transponder selection, the multi-switch has built-in special tuner modules, known as SCRs (satellite channel routers), for conversion to the subscriber frequencies
    ■ Each receiver is allocated a fixed subscriber frequency (a twin receiver requires two subscriber frequencies)
    ■ Compliant with the SCR unicable standard EN 50494, i.e. all unicable system components that comply with this standard can be installed in a satellite installation
    ■ Reception of the terrestrial range is possible even with the satellite receiver switched off
    ■ Unicable EXR 2942 multi-switches and loop-through multi-switches, such as the EXR 2981 and EXR 2998, can be mixed in any combination. Up to eight multi-switches can be cascaded
    ■ For indoor installation
    ■ Unicable multi-switch for two unicable connections for four receivers each, with built-in power supply unit for the LNB supply
    ■ Low power consumption due to high-efficiency, short-circuit proof switched-mode power supply unit and power-saving concept (the unicable multi-switch is powered by the receivers connected and is switched off when the receivers are switched off)
    ■ LNB remote feeding via the “horizontal low” inputs. All other inputs are voltage-free

  • Technical data

    Type: EXR 1942
    Order no.: 20510040
    Subscriber connections: 2 x 4
    Inputs: 1 x terrestrial/8 x Sat IF
    Through loss: -/- dB
    Connection loss (terrestrial): 5/- dB
    Horiz./vert. decoupling: -/30 dB
    Trunk decoupling: -/- dB
    Permissible input voltage range: 198-253 V
    Nominal input voltage: 230 (47-63 Hz) V
    Nominal input power at 0/300/800 mA load: 1,7/7,5/18 W
    Max. remote feed current (“horiz. low” input): 800 mA
    Protection class/protection type: II (double insulated)/IP 30
    Max. current drain at 14 Volt per subscriber connection: 130 mA
    Frequency range: 5-862/950-2150 MHz
    Max. permissible remote feed current per trunk: - mA
    Permissible supply voltage at the subscriber outlet: 12-14 V
    Operating level: -/88 dBµV
    Subscriber frequency/SCR addresses for each connection Receiver 1 Receiver 2 Receiver 3 Receiver 4: 1284/0 1400/1 1516/2 1632/3 MHz
    Secondary voltage (“horiz. low” input): 18 V
    Gain to subscriber connection (SAT) ¹): -/0 -> 3 dB
    Connections: F connectors
    Ambient temperature range: -20 to +55 °C
    Dimensions: 227 x 228 x 44 mm
    Packaging unit/weight: 1 (10)/1.0 pc/kg
  • ¹) Frequency-dependent attenuation/amplification (pre-emphasis)

  • Clear Filters

    loading ...

    All Files

    File: EXR 1942 2942 Bedienungsanleitung_07.19.pdf

    Category: Bedienungsanleitungen

    Download Link: EXR 1942 2942 Bedienungsanleitung_07.19.pdf

    Description: ​Bedienungsanleitung Deutsch / Englisch