• Remote feed possibility via horizontal low input. All other inputs are voltage-free (enabling operation with UAS 585)
• For indoor installation
• Built-in modem
• Modem for the Kathrein IP over Coax system “K-LAN (based on IEEE 1901 standard)”
• Ideal for network connection for receivers, TV sets and Blu-ray players. A PC and other devices that can be networked can also be conveniently connected to a router (e.g. FRITZ!Box)
• > 500 Mbit data throughput (gross) allows multiple HD streams with simultaneous data transmission between PCs. Thanks to QoS *) corresponding services are prioritised
• Interference-free due to high screening factor
• 128 bit AES encryption: Secure private network connection at the touch of a button - no software required
• Existing outlets that support the 5-68 MHz frequency range can still be used. Otherwise the use of the EXI 30 outlet specially developed for K-LAN is recommended **). This outlet allows remote feeding (supply) of the modem by the receiver. The IP frequency range is available at the satellite connection
• Eco power mode: The modem automatically switches to stand-by until it is “woken up” again by the network. Consumption: 1.0 Watt in stand-by/4.2 Watt in operation
• Built-in pre-emphasis for equalisation of cable attenuation
• Reception of terrestrial range possible even when satellite receiver is switched off
• Cascadable multi-switch with built-in modem for distribution of four satellite frequency planes and terrestrial signals to up to eight receivers
• Create a home network using the terrestrial distribution available on the multi-switch. The IP data is available at each subscriber outlet. This reduces the cost of installation as no new network cables need to be installed
• Built-in highly selective diplexer for the IP data
• Thanks to the optimised EXI 3508 distribution system, distances of up to 700 m are possible for the IP frequency range
• Built-in amplifier for low connection losses in the sat band
• Accessories:

EXI 30 sat socket (order no. 21110024): Outlet for remote feeding from the satellite connection, with optimum selection for data and HF signals

EXI 01 free-standing modem (order no. 20510061): For converting back IP data at the subscriber outlets (e.g. for connection of a satellite receiver with Ethernet socket)

EXI 700 software: Shows the visible modems in a network (free download from: www.kathrein.de)

EXI 90 High-pass filter (order no. 20510062): If additional multi-switches (not from EXI range) are used and the EXI 01 is used on one of these, then the high-pass filter must be screwed onto the terrestrial input of the multi-switch. This isolates downstream multi-switches in the cascade and prevents reception and emission in the IP frequency range by and from the terrestrial antenna. The EXI 3508 has a built-in high-pass filter

*) Quality of Service
**) Alternatively the ESD 84 and ESD 32 outlets can be used
¹) Frequency-dependent attenuation
²) In accordance with EN 60728-3, 35-dB-IMA
³) Modem in standby mode
⁴) Via “horizontal low” input
⁵) Of which currently used: 8-68 MHz