EXR 2908

Order number: 20510019

Multi-switch 9 to 8 - 5-862 and 8 x 950-2150 MHz - Cascadable - F connectors - DiSEqC controller - Built-in power supply unit: 18 V/800 mA

Multi-switch 9 to 8 - 5-862 and 8 x 950-2150 MHz - Cascadable - F connectors - DiSEqC controller... more
Product information "EXR 2908"
Related links to "EXR 2908"

PDF PRODUCT EXPORT

EXR 2908

PDF

SPECIAL FEATURES

    • Cascadable multi-switch for distribution of eight satellite frequency planes and terrestrial signals to multiple receivers
    • Only one drop cable is required for each receiver (two drop cables for twin receivers)
    • Independent horizontal/vertical, low/high, satellite position A/position B selection from each receiver using DiSEqCTM control
    • Built-in amplifier for low connection losses in the satellite range
    • Pre-emphasis for equalisation of cable attenuation
    • Reception of terrestrial range possible even when satellite receiver is switched off
    • High decoupling between outputs
    • LNB remote feeding via horizontal low inputs. All other inputs are voltage-free (enabling operation with UAS 585).
    • Low power consumption due to high-efficiency, short-circuit proof switched-mode power supply unit and power-saving concept (each individual multi-switch branch is powered by the connected receiver and is switched off whenever the receiver is switched off)
    • For indoor installation
      ■ If not using DiSEqCTM control, horizontal/vertical, low/high switching is possible from sat position A, with tone burst also sat position A / position B
    • Terrestrial range: 5-862 MHz passive
    • Multi-switch for eight connections, with built-in power supply unit
    • Cascadable with EXR 2998
  • Technical data

    Type: EXR 2908
    Order no.: 20510019
    Subscriber connections: 8
    Inputs: 1 x terrestrial / 8 x Sat IF
    Frequency ranges: 5-862 / 950-2150 MHz
    Through loss: - / - dB
    Attenuation ¹): 10 -> 13 / 5 -> 0 dB
    Horiz./vert. decoupling: - / 25 dB
    Subscriber decoupling: 25 / 25 dB
    Trunk decoupling: - / - dB
    Max. output level ²): - / 109 dBµV
    Control using DiSEqC™: Vert./horiz., low/high, Pos. A/B
    Control without DiSEqC™ with 14/18 V and 0/22 kHz, with tone: Vert./horiz., low/high (pos. A) pos. A/B
    Current drain per subscriber: 30 mA
    Permissible input voltage range: 198-253 V
    Nominal input voltage: 230 (47-63 Hz) V
    Nominal input power at 0/300/800 mA load: 1,7/7,5/18 W
    Secondary voltage ³): 18 V
    Max. total remote feed current ³): 800 mA
    Protection class/protection type: II (double insulated)/IP 30
    Max. permissible remote feed current per trunk: - mA
    Connections: F connectors
    Ambient temperature range: -20 to +55 °C
    Dimensions (W x H x D): 227 x 228 x 44 mm
    Packaging unit/weight: 1 (10)/1.0 pc/kg
  • ¹) Frequency-dependent attenuation
    ²) In accordance with EN 60728-3, 35 dB IMod
    ³) Via horizontal low input

  • Clear Filters

    loading ...

    All Files

    File: EXR2908_2998 Bedienungsanleitung_DE_GB_03.2020.pdf

    Category: Bedienungsanleitungen

    Download Link: EXR2908_2998 Bedienungsanleitung_DE_GB_03.2020.pdf

    Description: Bedienungsanleitung DE / GB


    File: EXR 2908 EU-Konformitätserklärung_2020.pdf

    Category: Erklärungen

    Download Link: EXR 2908 EU-Konformitätserklärung_2020.pdf

    Description: ​Konformitätserklärung