ZSH 62
Extending mast 2 x 3 m - 48/60 mm - St 52 - Thickness: 4.5 mm - Hot-dip galvanised - Twist protection - Permissible bending moment (800 N/m², 5/4 m useful length): 1950/2120 Nm
PDF PRODUCT EXPORT
SPECIAL FEATURES
■ Compliant with: EN 60728-17
■ Hot-dip galvanised
■ Twist protection
■ Complete with gripper clamp and seal
■ Easy installation on the roof
■ Extends with antennas installed
Technical data
| Type: | ZSH 62 ²) |
| Order no.: | 218383 |
| Length L: | 2 x 3 = 6 m |
| Permissible bending moment ¹), usable length at 800 N/m² at 5.0 m/4.0 m/3.0 m: | 1950 (1150)/2120 (1280)/- N/m136 |
| Permissible bending moment ¹), usable length at 1100 N/m² at 5.0 m/4.0 m/3.0 m: | 1700 (900)/1960 (1080)/- N/m136 |
| Wall thickness in clamping area: | 4,5 mm |
| Diameter D1/D8: | 48/60 mm |
| Grade (steel): | S 355 (St 52) |
| Cable insertions: | 5 |
| Packaging unit/weight: | 1/35.0 pc/kg |
¹) The max. permissible bending moment at the fixing point applies to the useful length. The wind loading of the mast has already been taken into account. In accordance with EN 60728-11 the mast clamped length must be a minimum of 1/6 of the mast length
²) The technical data is based on the calculation principles set out in DIN 4131. If the calculated bending moment exceeds the values stated in brackets (corresponding to 1650 Nm at the clamping point), static verification is required, in accordance with EN 60728-11