- Cascadable multiswitches for distribution of 16 satellite levels and terrestrial signals to many receivers
- Only one down conductor is required per receiver (two down conductors for twin receivers)
- Independent selection of horizontal/vertical, low/high, satellite positions A/B/C/D from any receiver through DiSEqCTM control
- With control without DiSEqC™, switching horizontal/vertical, low/high from Sat position A, with Tone Burst additionally Sat position A/position B is possible
- Integrated amplifier for low connection losses in the satellite range
- Integrated preemphasis to equalize cable attenuation
- Possibility of receiving the terrestrial range even when the satellite receiver is switched off
- Terrestrial range: 5-862 MHz passive
- High decoupling between outputs
- Remote power supply possibility via the inputs horizontal low. All other inputs are voltage-free (thus operation with UAS 585 possible).
- For indoor installation
- Multiswitch pass-through for system expansion by eight connections each
- High cascading capability (up to 40 connections)
Home | Products | TV reception / distribution | SAT ZF Distribution Technology | Multi Switches | Cascadable | EXR 1718
EXR 1718
Multiswitch with 8 connections for 4 satellites
Type: | EXR 1718 |
Order no: | 20510028 |
Subscriber lines: | 8 |
Inputs: | 1 x terr. / 16 x Sat IF |
Frequency ranges: | 5 – 862 MHz | 950 – 2150 MHz |
Throughput attenuation: | 4 / 1 → 3 ¹) dB |
Connection attenuation ¹): | 13 → 16 dB | 5 → 0 dB |
Decoupling horizontal → vertical: | 25 dB |
Decoupling participants: | 25 / 25 dB |
Decoupling strain: | 40 dB |
Max. Output level ²): | 112 dBµV |
Control with DiSEqC™: | Vert./horiz., low/high, pos. A/B/C/D |
Control without DiSEqC™ – with 14/18 V and 0/22 kHz – with Tone Burst: | Vert./horiz., low/high (pos. A) Pos. A/B |
Current consumption/participant: | 30 mA |
Protection class: | IP 30 |
Max. perm. Remote power supply current per trunk: | 1000 mA |
Connections: | F-Connectors |
Permissible ambient temperature: | -20 to +55 °C |
Dimensions (W x H x D) without F sockets: | 182 x 388 x 45 mm |
Packaging unit/weight: | 1 (5)/16 pcs./kg |
¹) Frequency-dependent attenuation
²) According to EN 60728-3, 35-dB-IMA
³) About the inputs horizontal low
Q & A
Ask a question
Your question will be answered by a store representative or other customers.
Thank you for the question!
Your question has been received and will be answered soon. Please do not submit the same question again.
Error
An error occurred when saving your question. Please report it to the website administrator. Additional information:
Add an answer
Thank you for the answer!
Your answer has been received and will be published soon. Please do not submit the same answer again.
Error
An error occurred when saving your answer. Please report it to the website administrator. Additional information: