- 10 years warranty corrosion resistant according to KATHREIN warranty conditions.
- Consisting of reflector, feed system mount and pole mount
- Reflector in proven aluminum design, powder coated
- Feed system holder made of galvanized sheet steel, powder coated
- Mast mounting made of sheet steel, hot-dip galvanized
- Optimum electrical data with minimum mechanical dimensions thanks to offset feed and swiveling multifeed adapter plate for positioning the feed systems in the secondary focal points typical of multifeed reception
- Two universal feed systems for reception of satellites 3° to 4° (e.g. ASTRA 19.2°/23.5°) or 6° (e.g. ASTRA/EUTELSAT-HOTBIRD) apart can be attached to the support arm without additional components.
- For other combinations, the ZAS 90 multifeed adapter plate is additionally required
- Snap-on cable holder for up to eight coaxial cables made of weather-resistant plastic
- All fasteners (screws, rivets, washers, M8 threaded brackets) are made of corrosion-resistant stainless steel or die-cast zinc
- High mounting comfort: completely pre-assembled, reflector with keyhole fastening, large wing nuts with attachment surface for open-end wrench SW 13, elevation scale on both sides, minimal dimensions of the support arm due to folding joint
- Patented swivel option of the multifeed adapter plate in stable, corrosion-resistant aluminum technology
- Interchangeable multifeed adapter plate included in delivery
CAS 80
SAT antenna ∅ 75 cm
| Type: | CAS 80 |
| Diameter: | 75 cm |
| Reception Area: | 10.70 – 12.75 GHz |
| Antenna gain at 10.70 – 11.70 GHz | 11.70 – 12.50 GHz | 12.50 – 12.75 GHz: | 36.8 dBi | 37.3 dBi | 37.7 dBi |
| System quality ²) Feed system centered; UAS 571/572/584/585: | 16.9 dB/K | 17.9 dB/K |
| System quality ²) Feed system distance 3° – 4°; UAS 571/572/584/585: | 16.6 dB/K | 17.4 dB/K |
| System quality ²) Feed system distance 6°; UAS 571/572/584/585: | 16.3 dB/K | 17.1 dB/K |
| Cross-polarization decoupling: | Type. > 26 dB |
| Wind load ³): | 450 N |
| Max. permissible wind speed: | 190 km/h |
| Adjustment range Elevation | Azimuth: | Foremast mounting 5 – 48 °/360° | Wall bracket mounting 90 °/360 ° |
| Adjustment range Multifeed adapter plate: | ± 15 ° |
| Half-width ¹): | Type. < 2,2 ° |
| Clamping range of the pole clamp: | 38 – 90 mm |
| Weight approx. net | gross: | 6.7 kg | 8.0 kg |
| Dimensions height max: | 884 mm |
| Dimensions delivery max. (from the center of the mast without feeding system): | 830 mm |
| Dimensions width: | 750 mm |
| Packing dimensions: | 1100 x 800 x 180 mm |
¹) At belt center
²) Type. G/T at 11.3/12.5 GHz
³) At a dynamic pressure of 800 N/m² according to EN 60728-11
- CAS 80 - Product data sheet (Version: 08/2023 - Größe: 150.67 KB) (115 downloads)
- CAS 80 - Produktdatenblatt (Version: 01/2023 - Größe: 63.19 KB) (532 downloads)
- CAS 80 - User Manual (Version: 1 - Größe: 2.62 MB) (276 downloads)
- CAS 80 - Bedienungsanleitung (Version: 1 - Größe: 2.48 MB) (1461 downloads)
... from the same product category & recommendations
House connection amplifier 47/85-1006 MHz | remotely powered via RF input (self-supply)
