- Cascadable multiswitches for distribution of eight satellite levels and terrestrial signals to many receivers
- Only one down conductor is required per receiver (two down conductors for twin receivers)
- Independent selection of horizontal/vertical, low/high, satellite position A/position B from any receiver through DiSEqCTM control
- Integrated amplifier for low connection losses in the satellite range
- Preemphasis for equalization of cable attenuation integrated
- Reception of the terrestrial range possible even when the satellite receiver is switched off
- High decoupling between outputs
- LNB remote power supply possibility via the inputs horizontal low. All other inputs are voltage-free (thus operation with UAS 585 possible).
- Low power consumption due to highly efficient, short-circuit-proof switched-mode power supply and power-saving concept (each individual multiswitch branch is supplied by the connected receiver and switched off when the receiver is switched off)
- For indoor installation
- With control without DiSEqC™, switching horizontal/vertical, low/high from Sat position A, with Tone Burst additionally Sat position A/position B is possible
- Terrestrial range: 5-862 MHz passive
- Multiswitch for eight connections, with integrated power supply unit
- Cascadable with EXR 2998
| Type: | EXR 2908 |
| Order no: | 20510019 |
| Subscriber lines: | 8 |
| Inputs: | 1 x terr. / 8 x Sat IF |
| Frequency ranges: | 5 – 862 MHz | 950 – 2150 MHz |
| Connection attenuation ¹): | 10 → 13 dB | 5 → 0 dB |
| Decoupling horizontal → vertical: | 25 dB |
| Decoupling participants: | 25 / 25 dB |
| Max. Output level ²): | 109 dBµV |
| Control with DiSEqC™: | Vert./horiz., low/high, pos. A/B |
| Control without DiSEqC™ – with 14/18 V and 0/22 kHz – with Tone Burst: | Vert./horiz., low/high (pos. A) Pos. A/B |
| Current consumption/participant: | 30 mA |
| Permissible input voltage range: | 198 – 253 V |
| Nominal input voltage: | 230 V (47 – 63 Hz) |
| Nominal input power at 0-/300-/800-mA load: | 1,7/7,5/18 W |
| Voltage secondary ³): | 18 V |
| Max. Total remote power supply current ³): | 800 mA |
| Protection class | Protection class: | II (protective insulation) | IP 30 |
| Connections: | F-Connectors |
| Permissible ambient temperature: | -20 to +55 °C |
| Dimensions (W x H x D): | 227 x 228 x 44 mm |
| Packaging unit/weight: | 1 (10)/1.0 pc/kg |
¹) Frequency-dependent attenuation
²) According to EN 60728-3, 35-dB-IMA
³) Via input horizontal low
Q & A
There are no questions yet
Ask a question
Your question will be answered by a store representative or other customers.
Thank you for the question!
Your question has been received and will be answered soon. Please do not submit the same question again.
Error
An error occurred when saving your question. Please report it to the website administrator. Additional information:
Add an answer
Thank you for the answer!
Your answer has been received and will be published soon. Please do not submit the same answer again.
Error
An error occurred when saving your answer. Please report it to the website administrator. Additional information:
... from the same product category
House connection amplifier 47/85-1006 MHz | remotely powered via RF input (self-supply)
